Description
S&S 585C Standard Chain Drive Camshaft Kit
585 cams are bolt-in cams. Cams that exceed the limits of the stock valve springs require the use of special high lift springs. Most S&S cams have higher lift than stock and are designed to take advantage of the extra flow of ported stock heads or S&S Super Stock heads. Due to the high lift of these cams, S&S adjustable pushrods are recommended. Not all grinds are available in the chain drive version. To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended.
Designed for 88 to 96 CID engines with compression ratios from 9:1 to 10:1 and 100 to 111 CID engines from 9.7:1 to 10.5:1 compression. Provides massive horsepower and torque increases starting at 3000 rpm and holds steady all the way to redline. 3500-6000 rpm for 88″-96″ engines and 2500-5500 for larger engines.
Quick installation and Easy Start Cams allow stock starter to start any engine.
Kit contains cams, gear cover gasket, cam bearings, and instructions.
Product Note:
| Country of Origin | USA |
| Drive Type | Chain Drive |
| Engine Type | Varies (make selection above) |
| Exhaust Duration | 260 degrees |
| Exhaust Lift | .179 in. |
| Exhaust Lobe Center | 110 degrees |
| Exhaust Timing (Close) | 20 degrees |
| Exhaust Timing (Open) | 60 degrees |
| Intake Duration | 245 degrees |
| Intake Lift | .186 in. |
| Intake Lobe Center | 102.5 degrees |
| Intake Timing (Close) | 45 degrees |
| Intake Timing (Open) | 20 degrees |
| Valve Lift | .585 in. |
Reviews
There are no reviews yet.